Never wrap over a hidden failure
Soft or rotted fascia should be repaired before metal is installed. Covering deterioration makes future diagnosis harder and leaves gutters dependent on weak material.
A crisp finish that protects sound wood.
Aluminum Fascia Wrapping & Exterior Trim
Custom-bent aluminum wrap shields properly prepared fascia from sun and repeated wetting while eliminating routine scraping and painting. The key is to correct damaged wood and water-entry details before the metal goes on.
Call (920) 879-2731Free inspection
Tell us about your project
Share a few details and our local team will follow up.
Built for Northeast Wisconsin
The local conditions matter.
Temperature swings require neat bends, secure fastening, and room for material movement. We pay close attention to overlaps, corners, roof returns, and the gutter interface so the finished metal looks straight and sheds water.
Wisconsin field notes
Aluminum fascia details that tolerate Wisconsin movement
Wrapping reduces painting and weather exposure, but it is a finish—not a structural repair. Sound wood, correct bends, water-shedding laps, and clean gutter integration come first.
Allow the metal to move
Temperature swings cause aluminum to expand and contract. Panel lengths, overlaps, hems, and fastening should hold the work neatly without unnecessary buckling.
Finish the top edge correctly
Drip edge, roof returns, corners, soffit channels, and gutter hangers should direct water over the face and away from the wood behind it.
What to watch for
Where aluminum wrapping adds value
01
Sound wood needs constant painting
Wrapping can reduce ongoing maintenance after the board is confirmed dry, secure, and properly prepared.
02
A roofline looks unfinished
Custom trim can create a consistent line across fascia, rake boards, corners, and adjoining soffit.
03
Gutters are being replaced
With gutters removed, it is an efficient time to inspect fascia and wrap sound or newly replaced boards before new hangers are installed.
04
Exposed edges weather quickly
Properly detailed metal helps shield vulnerable painted surfaces and wood end grain from repeated exposure.
A complete scope
What our aluminum fascia wrapping service includes
- Underlying wood and roof-edge condition check
- Custom-bent aluminum sized to the actual fascia profile
- Detailed corners, overlaps, rakes, and return transitions
- Color coordination with gutters, soffit, siding, and roof
- Final alignment and water-shedding review
Our process
1
Inspect the substrate
We verify that the board is secure and serviceable and identify repairs that must happen before wrapping.
2
Measure and form
Each section is measured and custom-bent for the actual roofline rather than forced into a generic profile.
3
Detail transitions
Corners, rakes, soffit channels, roof edges, and gutter attachment areas are formed to create a continuous finished line.
4
Complete the system
Related soffit and gutter components are restored, and the finished metal is checked for straightness and secure fastening.
Helpful answers
Aluminum Fascia Wrapping FAQs
Every home is different. These are the questions we hear most often before an inspection.
Can aluminum be wrapped over rotted fascia?+
No. Rot should be removed and the moisture source corrected first. Metal wrap protects a sound substrate; it is not a structural repair.
Does wrapped fascia still need painting?+
Factory-finished aluminum generally does not require routine painting, though it should still be inspected and cleaned as part of normal exterior maintenance.
Can fascia wrap match my gutters?+
Usually. Aluminum trim is available in a range of common exterior colors, and we coordinate the closest practical match with gutters, soffit, and siding.
Should fascia be wrapped before new gutters?+
Yes. Inspection, repair, and wrapping should be completed before final gutter attachment so the hangers secure through the finished assembly into sound material.
Keep planning
Related services
S
Soffit & Fascia
Fascia Replacement
Fascia supports the roof-edge finish and often carries the gutter system. When the wood is soft, split, or out of alignment, attaching new gutters or wrapping over it will not solve the structural problem.
Learn moreS
Soffit & Fascia
Soffit Installation
Soffit closes the underside of the roof overhang, but vented soffit also plays a key role in attic intake. We install durable panels and coordinate open intake paths so the visible finish and the hidden airflow both work.
Learn moreG
Gutters
Seamless Gutters
Gutters work only when the system is sized, pitched, supported, and discharged correctly. We form seamless aluminum runs to the home and plan outlets and downspouts around roof area, valleys, landscaping, walks, and foundation conditions.
Learn moreAsk about your home
Get a clear aluminum fascia wrapping recommendation.
Tell us what you are seeing and where the property is located. We will confirm the service area, inspect the relevant conditions, and explain the smallest responsible next step.
(920) 879-2731
1950 S Casaloma Dr STE B, Appleton, WI 54914
Request a free inspection
Fields marked with an asterisk are required.